PC won’t turn on after long storage? Fix no power, no display, or boot failure with this step-by-step troubleshooting guide for HP, Dell, Lenovo, and custom PCs.
Why Won’t My PC Start After Months of Inactivity? (Full Troubleshooting Guide)
If your branded PC (HP, Dell, Lenovo, etc.) or custom-built CPU isn’t turning on after long-term storage, don’t panic! This guide covers step-by-step fixes for no power, no display, or failure to boot issues.
🔧 Common Causes & Quick Fixes
✅ Power Supply Issues – Faulty cable, dead PSU, or tripped surge protector.
✅ CMOS/BIOS Corruption – Reset BIOS by removing the CMOS battery.
✅ Dust & Moisture Damage – Clean internal components.
✅ RAM/Connection Problems – Reseat RAM and check cables.
✅ Dead CMOS Battery – Replace the CR2032 battery.
✅ Faulty Motherboard/CPU – Rare, but possible after long storage.
Step 1: Basic Power Checks
For Desktops:
✔ Ensure the power switch (on the back of the PSU) is ON.
✔ Try a different power cable and wall socket.
✔ Check if the PSU fan spins briefly when powered on (if not, PSU may be dead).
⚡ For Laptops:
✔ Remove the battery (if possible) and try running on AC power only.
✔ Check for charging LED indicators (if no light, the adapter may be faulty).
🔄 Step 2: Reset BIOS (Clear CMOS)
Unplug the PC and open the case.
Locate the CMOS battery (a small coin-cell on the motherboard).
Remove it for 5-10 minutes, then reinsert it.
Alternatively, short the CMOS jumper pins (check motherboard manual).
⚠️ Note: This resets BIOS settings to default, which can fix boot failures.
🧹 Step 3: Clean & Reseat Components
🖥️ For Desktops:
✔ Remove dust using compressed air (focus on RAM slots, GPU, and PSU).
✔ Reseat RAM – Take out sticks, clean contacts with an eraser, and reinsert firmly.
✔ Check all power cables (24-pin motherboard & CPU 8-pin connectors).
💻 For Laptops:
✔ Try blowing air into vents to remove dust.
✔ If comfortable, open the back panel and reseat RAM & storage drives.
🖥️ Step 4: Test Minimal Hardware (For Desktops)
Disconnect all non-essential parts and try booting with:
Only CPU + 1 RAM stick
Integrated graphics (remove GPU if any)
No HDD/SSD connected
If it powers on, reconnect components one by one to find the faulty part.
⚠️ Step 5: Diagnose Hardware Failures
🔴 No Power at All?
➔ PSU might be dead – Test with a known working PSU (or use the paperclip test).
➔ Motherboard short circuit – Look for burnt components or swollen capacitors.
🟢 Power On But No Display?
➔ Try a different monitor/cable (HDMI/DP/VGA).
➔ Listen for beep codes (indicates RAM/GPU failure).
➔ Test with a different GPU (if available).
🔋 Additional Tips
✔ Replace the CMOS battery (CR2032) if BIOS settings reset frequently.
✔ Check for corrosion (common in humid environments) on metal contacts.
✔ Update BIOS (if PC boots but acts unstable).
🚨 When to Seek Professional Help
If none of these steps work, the issue could be:
Dead motherboard
Faulty CPU
Severe power supply failure
Since it’s a branded PC, check warranty status before opening it further.
Final Thoughts
Most “PC not starting” issues after storage are due to power, BIOS, or loose connections. Follow this guide step-by-step, and your PC should revive!
For More Information:
Call/ Whatsapp: 9828036274
Website: www.laptopcomputerskota.in
computers mela kota google my buisness profile with location
https://maps.app.goo.gl/PJdCFWLhUjG9EADM9
#PCRepair #ComputerNotStarting #FixPC #NoPowerPC #TechTroubleshooting #DIYPCFix #PCBootFailure #DeadPCFix #ComputerMaintenance #CMOSReset #LaptopRepair #DesktopRepair #TechGuide #CustomPC #HP #Dell #Lenovo #ComputerTips #HardwareTroubleshooting #PCBuildHelp